Gray Market
Policy
IMPORTANT SAFETY NOTICE
GRAY MARKET TRACTORS
What is a “Gray Market Product?” A simple definition is a trademarked product originally designed and manufactured for use in a foreign market that is imported for resale in the United States without the consent of the owner of the trademark. In this instance, used Yanmar®-brand tractors originally designed and manufactured by Yanmar Diesel Engine Co., Ltd. [“Yanmar”] for intended use in Japan or other countries that are being imported into the United States and sold to U.S. consumers by third parties without Yanmar’s consent or authorization.
The Yanmar®-brand tractors designed for intended use in Japan do not meet U.S. standards and regulations in several respects. They also have other important differences from Yanmar®-brand tractors designed and manufactured for the U.S. market and distributed through authorized channels. Some of these differences can affect the safe operation of the equipment. The purpose of this notice is to warn dealers, potential purchasers and owners and operators of “gray market” Yanmar®-brand tractors of these differences. The most important safety-related differences between "gray market" Yanmar®-brand tractors and those that were designed for the U.S. market and distributed through authorized channels are as follows:
TRACTORS
Rollover Protective Structures (ROPS) and a seatbelt, certified to U.S. standards, which are recommended or required for tractors in the U.S. market, are not available for gray market tractors. A tractor without ROPS and a seatbelt will, under many circumstances, afford the operator less protection in a rollover accident than a tractor with certified ROPS and a fastened seatbelt.
Power Take-Off (PTO) master shields and guards, required on tractors for the U.S. market, are not normally installed on gray market tractors. These devices are intended to protect from injury inadvertent contact with the rotating PTO shaft.
Gray market tractors generally do not have an over-running clutch on the PTO whereas tractors designed for the U.S. market generally do. When a gray market tractor without such feature is used with a large rotary implement, it is possible for the tractor to continue moving even when the brakes are applied. Such implements are common in the U.S., but not in Japan.
Some gray market tractors are not equipped with a safety start switch. This feature is designed to prevent the tractor from starting in gear and potentially striking or running over an operator who misuses the tractor by starting it from the ground instead of from the operators seat as per Yanmar's instructions.
Pulling on the throttle of a gray market tractor will cause it to accelerate whereas pulling on the throttle of a tractor designed for the U.S. market will cause it to decelerate. This difference can have potential safety consequences for an unsuspecting operator.
Gray market tractors have multiple PTO speeds for operating implements whereas tractors designed for the U.S. market generally have one PTO speed, namely, 540 revolutions per minute (rpm). If a gray market tractor is used with an implement designed for the U.S. market, the implement can be operated at revolution speeds in excess of its 540 rpm design speed, potentially leading to catastrophic failure of the implement and possible injury.
Operators manuals for gray market tractors were written in the Japanese language and are not available from Yanmar in the English language.
Warning decals for gray market tractors were written in the Japanese language and are not available from Yanmar in the English language.
Ryan M. Pott
Yanmar America Corporation
101 International Parkway
Adairsville, GA 30103
770-877-9894
Authorized For Sale in the U.S. by Yanmar Co. Ltd.
Excavators
Backhoe Loaders
Carriers
Loaders
IMPORTANT SAFETY NOTICE
GRAY MARKET TRACTORS
What is a “Gray Market Product?” A simple definition is a trademarked product originally designed and manufactured for use in a foreign market that is imported for resale in the United States without the consent of the owner of the trademark. In this instance, used Yanmar®-brand tractors originally designed and manufactured by Yanmar Diesel Engine Co., Ltd. [“Yanmar”] for intended use in Japan or other countries that are being imported into the United States and sold to U.S. consumers by third parties without Yanmar’s consent or authorization.
The Yanmar®-brand tractors designed for intended use in Japan do not meet U.S. standards and regulations in several respects. They also have other important differences from Yanmar®-brand tractors designed and manufactured for the U.S. market and distributed through authorized channels. Some of these differences can affect the safe operation of the equipment. The purpose of this notice is to warn dealers, potential purchasers and owners and operators of “gray market” Yanmar®-brand tractors of these differences. The most important safety-related differences between "gray market" Yanmar®-brand tractors and those that were designed for the U.S. market and distributed through authorized channels are as follows:
TRACTORS
Rollover Protective Structures (ROPS) and a seatbelt, certified to U.S. standards, which are recommended or required for tractors in the U.S. market, are not available for gray market tractors. A tractor without ROPS and a seatbelt will, under many circumstances, afford the operator less protection in a rollover accident than a tractor with certified ROPS and a fastened seatbelt.
Power Take-Off (PTO) master shields and guards, required on tractors for the U.S. market, are not normally installed on gray market tractors. These devices are intended to protect from injury inadvertent contact with the rotating PTO shaft.
Gray market tractors generally do not have an over-running clutch on the PTO whereas tractors designed for the U.S. market generally do. When a gray market tractor without such feature is used with a large rotary implement, it is possible for the tractor to continue moving even when the brakes are applied. Such implements are common in the U.S., but not in Japan.
Some gray market tractors are not equipped with a safety start switch. This feature is designed to prevent the tractor from starting in gear and potentially striking or running over an operator who misuses the tractor by starting it from the ground instead of from the operators seat as per Yanmar's instructions.
Pulling on the throttle of a gray market tractor will cause it to accelerate whereas pulling on the throttle of a tractor designed for the U.S. market will cause it to decelerate. This difference can have potential safety consequences for an unsuspecting operator.
Gray market tractors have multiple PTO speeds for operating implements whereas tractors designed for the U.S. market generally have one PTO speed, namely, 540 revolutions per minute (rpm). If a gray market tractor is used with an implement designed for the U.S. market, the implement can be operated at revolution speeds in excess of its 540 rpm design speed, potentially leading to catastrophic failure of the implement and possible injury.
Operators manuals for gray market tractors were written in the Japanese language and are not available from Yanmar in the English language.
Warning decals for gray market tractors were written in the Japanese language and are not available from Yanmar in the English language.
Ryan M. Pott
Yanmar America Corporation
101 International Parkway
Adairsville, GA 30103
770-877-9894
Authorized For Sale in the U.S. by Yanmar Co. Ltd.
| GT 14 | YM 186D |
| YM 122 | YM 187 |
| YM 135 | YM 187D |
| YM 135D | YM 195 |
| YM 140 | YM 195D |
| YM 140D | YM 220 |
| YM 146 | YM 220D |
| YM 147 | YM 226 |
| YM 147D | YM 226D |
| YM 155 | YM 240 |
| YM 155D | YM 240D |
| YM 165 | YM 276 |
| YM 165D | YM 276D |
| YM 169 | YM 330 |
| YM 169D | YM 330D |
| YM 180 | YM 336 |
| YM 180D | YM 336D |
| YM 186 |
Excavators
| Model | Machine Serial number |
| B17-2B | 30501 and after |
| B22-2B | 60501 and after |
| B27-2B | 65001 and after |
| B37-2B | 60501 to 60800 |
| B37-2B | 65001 and after |
| B50-2B | 60501 to 61145 |
| B50-2B | 60501 and after |
| B14 | 00501 and after |
| B15-3 | BK11A26026 & after |
| B08-3 | 00501 and after |
| SV08-1 | 10501 and after |
| SV08-1A | 14001 and after |
| Vio15-2 | 20501 and after |
| Vio15-2A | 27501 and after |
| Vio17 | 00501 and after |
| Vio20-2 | 20501 and after |
| Vio20-3 | 30501 and after |
| Vio27-2 | 20501 and after |
| Vio27-3 | 30501 and after |
| Vio27-5 | 50501 and after |
| Vio27-5B | 53001 and after |
| Vio35-2 | 20501 and after |
| Vio35-3 | 30501 and after |
| Vio35-5 | 50501 and after |
| Vio35-5B | 53001 and after |
| Vio40-2 | 20501 and after |
| Vio40-2A | 25501 and after |
| Vio40-3 | 30501 and after |
| Vio45-5 | 50501 and after |
| Vio45-5B | 53001 and after |
| Vio50-2 | 20501 and after |
| Vio50-2A | 25501 and after |
| Vio50-3 | 30501 and after |
| Vio55-5 | 50501 and after |
| Vio55-5B | 53001 and after |
| Vio70 | 05001 and after |
| Vio75 | 00501 and after |
| Vio75-A | 10501 and after |
| Vio75-C | 15001 and after |
| Vio80 | 90501 and after |
| B7-3 | 30501 and after |
| B7-5A | 57501 and after |
| SV100 | 00501 and after |
| SV100-1 | 10501 and after |
Backhoe Loaders
| Model | Machine Serial number |
| CBL40 | 00501 and after |
Carriers
| Model | Machine Serial number |
| C12R | 20501 and after |
| C12R-A | 22501 and after |
| C12R-B | 25001 and after |
| C30R-US | 00501 and after |
| C30RUS-2B | 01001 & after |
| C50R-3 | 40501 and after |
| C50R-3A | 41501 and after |
| C50R-3B | 45501 and after |
Loaders
| Model | Machine Serial number |
| V3-3 | 31001 and after |
| V4-3 | 31001 and after |
| V3-5 | 00001 and after |
| V4-5 | 00001 and after |
| V3-5A | 53001 and after |
| V4-5A | 52001 and after |
| V4-5B | 52501 and after |
| V4-5D | 53001 and after |
| V3-6 | 60501 and after |
| V4-6 | 60501 and after |
